Billet Aluminum Oil Filter | Replacement Quad Ring QR2

The K&P Engineering Billet Aluminum Oil Filter filter element is made from medical-grade, type 304 stainless steel micronic filter cloth, providing unmatched protection against oil contamination and resultant engine damage. A one-inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is suitable for temperatures up to 600 degrees Fahrenheit, which is far above the regular engine operating temperatures. A super-strength nickel-plated neodymium rare-earth magnet is installed on the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist-lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of a solid chunk of 6061T6 billet aluminum, which looks trick and aids in dissipating heat. FEATURES - Woven stainless steel filter cloth - Provides up to 7 times more oil flow from stock - Reduces Bypass Operation - Provides Faster Oil Pressure at Startup - Reduces Oil Pump Drag for Potential HP Gains - Nickel-plated rare earth magnet provides additional filtration - Billet aluminum housing aids heat dissipation - Inspect the filter for contamination in seconds - Environmentally Friendly: Clean and reuse… Lifetime oil filter. Filter Number S1 FITMENTS - Kawasaki ZX-14/R - Kawasaki ZX-10R - See the Fitment Tab above for additional fitments Oil Filter Specs - Thread: 20mm x 1.5 - Overall Diameter: 2.7" (69mm) - Overall Length: 2.8" (70.5mm) - Quad Ring OD: 2.5" (63.5mm) Parts List - Housing: C1 - Quad Ring: QR1 - Filter Element: FE1 - Filter Element Retaining Spring: FERS1 Filter Number S2 FITMENTS - Suzuki Hayabusa - Suzuki GSX-R1000 - See the Fitment Tab above for additional fitments Oil Filter Specs - Thread: 20mm x 1.0 - Overall Diameter: 2.7" (69mm) - Overall Length: 2.8" (70.5mm) - Quad Ring OD: 2.5" (63.5mm) Parts List - Housing: C1 - Quad Ring: QR1 - Filter Element: FE2 - Filter Element Retaining Spring: FERS1 Filter Number S4 FITMENTS - Harley-Davidson Touring - Harley-Davidson Dyna - Harley-Davidson Softail - Harley-Davidson Sportster - See the Fitment Tab above for additional fitments Oil Filter Specs - Thread: 3/4" x 16 - Overall Diameter: 2.92" (74.16mm) - Overall Length: 3.04" (77.21mm) - Quad Ring OD: 2.75" (69.85mm) Parts List - Housing: C2 - Quad Ring: QR2 - Filter Element: FE4 - Filter Element Retaining Spring: FERS1 NOTES - Ensure the quad ring is fully seated in the housing groove and lube with clean oil before installation. A quad ring can normally be used for several oil changes. - Torque filter to either factory specs or 18-20 lb ft, whichever is less K&P Engineering: Oil Filter Cleaning